SHOEI S12 REPLACEMENT VISORS MEDIUM AND LARGE SIZE HELMETS BHV35
£16.66 – £19.16 excluding shipping and VAT
New Bob Heath replacement visors for the classic Shoei S12 medium and large size helmets.
UK orders will be subject to VAT at the applicable rate at the checkout.
All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.
Description
SHOEI S12 REPLACEMENT VISORS FOR MEDIUM AND LARGE SIZE HELMETS – BHV35
We produce two sizes of visor for the S12 helmets. This listing is for our visor BHV35 which fits medium and large size helmets only. This visor will not fit S12 XL size helmets as they have pivot fittings which are set further apart on the helmet and require a larger size visor which we do not produce.
We recommend that you check the following measurements against your helmet prior to ordering a visor :-This visor measures 335mm between the inside edges of the pivot hole slots, and 312mm between the centres of the two bottom edge press studs. If you are unsure about the size of your own helmet then compare these measurements with your original visor or measure around your helmet in the two relevant areas.
Please see our other listing for BHV34 which fits small size helmets.
These are 1.0 mm thick flat visors that are secured by screw in type top fixings passed through the two top edge pivot slots and then fastening the two bottom edge press studs to retain the visor in position
Please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.
The clear visors are BSI approved and fully U.K. road legal, the light smoke tint option are non certified for off road use . They give 97 % U.V. light protection. The smoke tint visors have a light transmission of approximately 50% .
Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.
Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.