SHOEI CWR-F2R 2D RACE VISOR TEAR OFFS BHVT018

Description

SHOEI CWR-F2R 2D RACE VISOR TEAR OFFS BHVT018

Tear Off/Rip Off films for the  SHOEI CWR-F2 2D Race type visors as fitted to :-

SHOEI NXR 2, and X-SPR PRO HELMETS.

THESE TEAR OFFS WILL NOT FIT THE EARLIER SHOEI CF-1, AND CF-1V , CWF-1, OR  CWR-F   2D RACE TYPE VISORS. TEAR OFFS FOR THESE MODELS ARE AVAILABLE SEPERATELY ON OUR WEB SITE.

THESE TEAR OFFS ONLY FIT THE 2D RACE TYPE VISORS WITH TEAR OFF POST/PIN LOCK COMBINATION MOUNTING POSTS, THEY DO NOT FIT ONTO PIN LOCK MOUNTING PINS.

They are designed to be fitted to flat front 2D single curve race visors equipped with black/clear tear off posts .To check if your visor is flat fronted , hold a straight edge vertically against the centre of the visor and it should sit flat against the face. See a picture of a 2D race visor in our images for this item.

The tear offs are 103mm wide measured vertically across the centre area.

Made by Bob Heath Visors in the U.K. from 0.08mm thick high optical grade clear polyester film with tissue paper interleaves between each film.

You can use them on the road or track to help prevent damage to your visor from flying stones/flies , to help keep it clean and generally prolong the life of your visor .They give you clearer vision in an instant simply by “tearing off” the film from your visor to reveal the clean surface underneath.

For high speed use we recommend sticking small strips of clear adhesive tape over and along the edges of the film to help secure them in place as is common practise in motorcycle racing.

It is recommended that you use no more than three tear off films on your visor at a time.

We also make these tear offs in light and dark tint smoke options, please select the option you require from the drop down list.