BELL STAR 1 REPLACEMENT VISORS BHV04

New Bob Heath replacement visors for the following vintage 1970s BELL helmets -

STAR 1.

Description

          BELL STAR 1, MOTORCYCLE HELMET REPLACEMENT VISORS

These visors fit the first version of the Bell Star helmet which is known as the mark 1. This first version of the Star helmet uses a short visor which measures 31.5 cms between the inside edges of the pivot hole slots, it should not be confused with the later Bell Star 2 helmet which uses a longer visor ( 35 cms between pivot the inside edges of the pivot hole slots )

These  are 1.0 mm thick flat visors  that are designed to be fitted by simply clipping over the two top edge pivot slots onto the pivot fittings on the helmet and then fastening the two bottom edge press studs to retain the visor in position

Please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.

We have visors available for the later Bell Star 2 helmets on a seperate listing on our website.

We also have pivot fitting kits available for these helmets BHV reference kit 2 .

The visors are BSI approved and fully U.K. road legal. They give 97 % U.V. light protection. The smoke tint visors have a light transmission of 50%

Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.

Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.

Additional Image(s)

BELL STAR 1 REPLACEMENT VISORS BHV04BELL STAR 1 REPLACEMENT VISORS BHV04

User Reviews


£18.49
inc VAT
18.49

BELL STAR 1 REPLACEMENT VISORS BHV04

People who viewed this product were also interest in:

BELL STAR 1 & 2 HELMET PIVOT FITTING KITS
(BHV KIT 2)
BELL STAR 1 & 2 HELMET PIVOT FITTING KITS