AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54

New Bob Heath replacement visors for the following vintage 1980s AGV helmets -

X3000/80 .

This should be considered as the MK2 AGV X3000 helmet as there are earlier and later versions with different visors - so please check before purchasing.

Description

These  are 1.0 mm thick flat visors made to fit the AGV X3000/80 helmets from the 1980's that had pivot fittings that require the visor to simply clip over the pivot fittings to retain them in position on the helmet.This clip over top pivot fixing type helmet could be considered as the MK2 helmet.This was the second version of the X3000 helmet and there are earlier and later versions with different visors -so please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.

The earlier version of these helmets also made in the 1980's had screw in pivot fittings that passed through the visor to retain them in position on the helmet.The visor on these helmets is shorter in length and measures 31.4 cms between the inside edges of the pivot hole slots, and 23.0 cms between the inside edges of the lower stud slots this is our visor BHV002 .

This listing is for our visor BHV54  .          

THESE VISORS DO NOT FIT THE NEW 2017 ONWARDS AGV X3000 'LEGENDS' LEG-1 HELMETS WITH 3D BUBBLE SHAPE VISORS.

The visors are BSI approved and fully U.K. road legal. They give 97 % U.V. light protection. The smoke tint visors have a light transmission of 50%

Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.

Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.

The visors are available in clear and light tint smoke options . Please select which option you require from the drop down list.

Product Details

THESE VISORS MEASURES 33.5 cms BETWEEN THE INSIDE EDGES OF THE PIVOT HOLE SLOTS, AND 26.0 cm BETWEEN THE INSIDE EDGES OF THE LOWER STUD SLOTS.

THEY ARE 1.0 MM FLAT VISORS THAT ARE SECURED IN PLACE VIA THE TWO TOP EDGE SLOTS THAT THE SCREW FITTINGS OF YOUR HELMET FIX THROUGH, AND THE TWO BOTTOM EDGE PRESS STUDS THAT FIX ONTO THE STUDS ON YOUR HELMET.

AS THERE ARE NOW 3 DIFFERENT AGV X3000 HELMETS IT IS MOST IMPORTANT THAT YOU CHECK THE MEASUREMENTS ABOVE IF YOU ARE NOT 100% SURE WHICH MODEL YOU HAVE.


Additional Image(s)

AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54

User Reviews


£18.49
inc VAT
18.49

AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54

People who viewed this product were also interest in:

AGV AGO, X3000/80 (1980's model) VISORS WITH PIVOT SCREW TOP FITTINGS BHV002
(BHV002)
AGV AGO, X3000/80 (1980's model) VISORS WITH PIVOT SCREW TOP FITTINGS BHV002