FULMER AF50 REPLACEMENT VISORS BHV09

New Bob Heath replacement visors for the following FULMER helmets :-

AF50 .

Description

New replacement visors for the classic/vintage Authur Fulmer AF50 helmets from the 1970,s/1980,s .

These visors are available in clear or light tint smoke and can also be fitted with six mesh air vents to the visor bottom edges for improved air flow into your helmet. Please select which option you require from the drop down list .

They are flat 1.0mm thick visors that are secured in place via the two top edge slots that sit under the helmet pivot fittings, and the two bottom edge press studs that fix onto the studs on your helmet.

The visors are BSI approved  and are made in the U.K.by Bob Heath Visors Ltd from lexan abrasion resistant coated polycarbonate plastic.

They are fully U.K.road legal and give 97 % U.V. light protection .

The distance between the pivot hole slots measures 335mm between the inner edges  and 375mm between the outer edges of the slots.

These visors do not fit the later Fulmer AF50 Eagle helmets with smaller 10.0mm diameter press stud sockets.

THESE VISORS ALSO FIT THE CABERG 100 AND GEMINI CLASSIC/VINTAGE  HELMETS FROM THE 1970/80,S .


Additional Image(s)

FULMER AF50 REPLACEMENT VISORS BHV09FULMER AF50 REPLACEMENT VISORS BHV09FULMER AF50 REPLACEMENT VISORS BHV09FULMER AF50 REPLACEMENT VISORS BHV09FULMER AF50 REPLACEMENT VISORS BHV09

User Reviews


£18.49
inc VAT
18.49

FULMER AF50 REPLACEMENT VISORS BHV09