BELL STAR 2, MOTORCYCLE HELMET REPLACEMENT VISORS
These visors fit the second version of the Bell Star helmet which is known as the mark 2. This second version of the Star helmet uses a longer visor which measures 35 cms between the inside edges of the pivot hole slots , it should not be confused with the earler Bell Star 1 helmet which uses a shorter visor ( 31.5 cms between the inside edges of the pivot hole slots )
These are 1.0 mm thick flat visors that are designed to be fitted by simply clipping over the two top edge pivot slots onto the pivot fittings on the helmet and then fastening the two bottom edge press studs to retain the visor in position
Please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.
We have visors available for the earlier Bell Star 1 helmets on a seperate listing on our website.
We also have pivot fitting kits available for these helmets BHV reference kit 2 .
The visors are BSI approved and fully U.K. road legal. They give 97 % U.V. light protection. The smoke tint visors have a light transmission of 50%
Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.
Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.