X-LITE X02R, X601, X602 TEAR OFFS FOR 2D RACE TYPE VISORS BHVT010
£8.33 – £16.66 excluding shipping and VAT
Tear Off/Rip Off films for X-LITE ,X02R, X601, X602 2D Race type visors ONLY made by Bob Heath Visors.
UK orders will be subject to VAT at the applicable rate at the checkout.
All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.
X-802 R,X-601/602/701/N94 VISOR TEAR OFFS FOR SINGLE
CURVE RACE VISORS
sale clear visor tear off films to fit X-LITE full
face motorcycle helmets fitted with single curve (flat front) race
type visors. These genuine visors are marked with the following
LITE X 802…………………………… part number XFR
LITE X 601/X 602/ X 701/ N94……..part number XFR
SEE THE INFORMATION ON THE FIRST PICTURE OF THE LISTING AND CHECK THE
DISTANCE BETWEEN THE TEAR OFF MOUNTING POST CENTRES ON YOUR ORIGINAL
VISOR AS X-LITE HAVE PRODUCED VISORS WITH TWO DIFFERENT MOUNTING POST
POSITIONS. THESE TEAR OFFS ARE TO SUIT VISORS WITH THE POSTS SET AT
329 MM. IF YOUR POST CENTRES MEASURE 318MM, THEN YOU REQUIRE OUR
X-801 TYPE TEAR OFFS BHV PART NUMBER T009.
NOTE THESE TEAR OFFS ARE ONLY SUITABLE FOR SINGLE CURVE RACE VISORS ,
NOT DOUBLE CURVE ROAD TYPE VISORS .TO CHECK
IF YOUR VISOR IS FLAT FRONTED , HOLD A STRAIGHT EDGE VERTICALLY
AGAINST THE CENTRE OF THE VISOR AND IT SHOULD SIT FLAT AGAINST THE
FACE. SEE PICTURE ONE OF A 2D RACE VISOR IN OUR IMAGES FOR THIS ITEM. DO NOT CONFUSE PIN LOCK INSERT
LOCATION POSTS WITH TEAR OFF MOUNTING POSTS. PIN LOCK POSTS ARE
TYPICALLY SET AT APPROX. 293MM APART. TEAR OFF POSTS WILL HAVE A
GROOVE UNDER THE HEAD FOR THE TEAR OFFS TO SIT IN.
Made by Bob Heath Visors in the U.K. from 0.08mm thick high optical grade clear polyester film with tissue paper interleaves between each film.
You can use them on the road or track to help prevent damage to your visor from flying stones/flies , to help keep it clean and generally prolong the life of your visor .They give you clearer vision in an instant simply by “tearing off” the film from your visor to reveal the clean surface underneath.
For high speed use we recommend sticking small strips of clear adhesive tape over and along the edges of the film to help secure them in place as is common practise in motorcycle racing.
It is recommended that you use no more than three tear off films on your visor at a time.
We also make these tear offs in light tint and dark smoke tint options, please select the option you require from the drop down list.