SIMPSON M41, M61 REPLACEMENT VISORS BY BOB HEATH VISORS BHV91

Description

SIMPSON M41, M61 FULL FACE HELMET REPLACEMENT VISORS

BRAND NEW REPLACEMENT VISORS FOR THE CLASSIC/VINTAGE SIMPSON, M41, M61 HELMET FROM THE 1980,S .

THE VISORS ARE MADE IN THE U.K. BY BOB HEATH VISORS LTD FROM 1.0 MM LEXAN POLYCARBONATE PLASTIC.

THEY ARE FLAT VISORS THAT ARE SECURED IN PLACE VIA THE TWO TOP EDGE SLOTS THAT CLIP OVER THE PIVOT FITTINGS ON YOUR HELMET, AND THE TWO BOTTOM EDGE PRESS STUDS THAT FIX ONTO THE THE STUDS ON YOUR HELMET TO LOCK THEM DOWN IN THE CLOSED POSITION.

THESE VISORS ONLY REPLACE FLAT ORIGINAL SIMPSON VISORS, NOT MOULDED IE. CURVED SIMPSON VISORS SUCH AS ARE FITTED TO THE LATER BANDIT HELMETS.

THEY ARE AVAILABLE IN CLEAR, LIGHT SMOKE TINT AND DARK SMOKE TINT, PLEASE SELECT WHICH COLOUR YOU REQUIRE FROM THE OPTIONS LIST.

The clear visors are BSI approved and fully U.K. road legal, the light smoke tint and dark smoke tint option are non certified for off road use . They give 97 % U.V. light protection. The smoke tint visors have a light transmission of approximately 50% and the dark tint approximately 20%.

Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.

Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.

PLEASE NOTE THE FOLLOWING INFORMATION FOR THE DARK AND LIGHT SMOKE TINT  COLOUR OPTIONS

These BHV  tinted race visors are not legal for U.K. public road use (and possibly other regions.

The visors are supplied for circuit racing ,track day use, or use on private roads.

IT IS YOUR SOLE RESPONSIBILITY TO KNOW THE LEGAL RESTRICTIONS FOR VISORS IN YOUR REGION.WE CANNOT BE HELD LIABLE FOR ANY CONSEQUENCES ARISING FROM THE MISUSE OR ILLEGAL USE OF THIS PRODUCT.