JEBS REGAZZONI, LARGE SIZE REPLACEMENT VISORS BHV79

£16.66£19.16 excluding shipping and VAT

New Bob Heath 1.0mm thick flat replacement LARGE size visors for the JEBS REGAZZONI,F1 helmets.

UK orders will be subject to VAT at the applicable rate at the checkout.

All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.

SKU: JEBS,REGAZZONI, LARGE SIZE REPLACEMENT VISORS BHV79 Categories: ,

Description

THIS LISTING IS FOR BRAND NEW REPLACEMENT SMALL SIZE VISORS FOR THE VINTAGE JEBS REGAZONNI F1 EARLY TYPE HELMET FROM THE 1980,S .

THESE VISORS ARE MADE TO FIT THE JEBS REGAZZONI HELMETS FEATURING CLIP OVER PIVOT FITTINGS AND PRESS STUDS TO RETAIN THE VISOR IN THE FULLY CLOSED POSITION. THEY DO NOT FIT THE LATER VERSIONS OF THIS HELMET WHICH HAD PRE CURVED (MOULDED) VISORS AND NO PRESS STUDS ON THE HELMET.

THESE ARE FLAT VISORS THAT ARE SECURED IN PLACE VIA THE TWO TOP EDGE SLOTS THAT CLIP OVER THE PIVOT FITTINGS ON YOUR HELMET, AND THE TWO BOTTOM EDGE PRESS STUDS THAT FIX ONTO THE THE STUDS ON YOUR HELMET.

VERY IMPORTANT, PLEASE READ BEFORE ORDERING

THERE ARE TWO SIZES OF VISOR AVAILABLE FOR THESE JEBS HELMETS, THIS LISTING IS FOR THE LARGE SIZE VISOR BHV79 FOR THE REGAZZONI F1 HELMET. THE VISOR MEASURES 36cm BETWEEM THE CENTRES OF THE PIVOT SLOTS AND HAS AN OUTER LENGTH OF 41cm . THE VISOR IS 162mm WIDE AT THE CENTRE .

PLEASE SEE OUR LISTING FOR THE REGAZZONI C.R/F1 HELMET WHICH REQUIRES THE SMALL SIZE VISOR BHV84. THE VISOR MEASURES 33.5cm BETWEEM THE CENTRES OF THE PIVOT SLOTS AND HAS AN OUTER LENGTH OF 38cm . THE VISOR IS 148mm WIDE AT THE CENTRE .

THE VISORS ARE AVAILABLE IN CLEAR,AND LIGHT SMOKE TINT. PLEASE SELECT WHICH COLOUR YOU REQUIRE FROM THE OPTION LIST WHEN YOU CLICK TO BUY.

THE CLEAR VISORS ARE  BSI APPROVED AND FULLY U.K.ROAD LEGAL .THEY GIVE 97 % U.V. LIGHT PROTECTION . THE LIGHT SMOKE TINT VISORS ARE NON CERTIFIED FOR OFF ROAD USE AND HAVE A LIGHT TRANSMISSION OF APPROXIMATELY 50%.

THE VISORS ARE MADE FROM 1.0MM THICK LEXAN POLYCARBONATE IN THE U.K. BY BOB HEATH VISORS LTD, ALL OF THESE VISORS HAVE AN ABRASION RESISTANT COATING ON BOTH SIDES.

TINTED VISORS ARE RECOMMENDED FOR DAYTIME USE ONLY AND ARE STAMPED AS SUCH AS PER THE BSI STANDARD REQUIREMENT.

WE ALSO MAKE REPLACEMENT VISORS FOR THE JEBS CECOTTO HELMETS OUR REFERENCE NUMBER BHV85, IF YOU REQUIRE THIS VISOR PLEASE MESSAGE US .