FULMER AF50 REPLACEMENT VISORS BHV09

£16.66£22.49 excluding shipping and VAT

New Bob Heath replacement visors for the following FULMER helmets :-

AF50 .

UK orders will be subject to VAT at the applicable rate at the checkout.

All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.

SKU: FULMER AF50 REPLACEMENT VISORS BHV09 Categories: ,

Description

FULMER AF50 REPLACEMENT VISORS BHV09

New replacement visors for the classic/vintage Authur Fulmer AF50 helmets from the 1970,s/1980,s .

These visors are available in clear or light tint smoke and can also be fitted with six mesh air vents to the visor bottom edges for improved air flow into your helmet. Please select which option you require from the drop down list .

They are flat 1.0mm thick visors that are secured in place via the two top edge slots that sit under the helmet pivot fittings, and the two bottom edge press studs that fix onto the studs on your helmet.

The clear visors are BSI approved and are made in the U.K.by Bob Heath Visors Ltd from lexan abrasion resistant
coated polycarbonate plastic.

They are fully U.K.road legal and give 97 % U.V. light protection .

The smoke tint visors are non certified for off road use and have a light transmission of approximately 50%.

The distance between the pivot hole slots measures 335mm between the inner edges and 375mm between the outer edges of the slots.

These visors do not fit the later Fulmer AF50 Eagle helmets with smaller 10.0mm diameter press stud sockets.

THESE VISORS ALSO FIT THE CABERG 100 AND GEMINI CLASSIC/VINTAGE HELMETS FROM THE 1970/80,S .