BELL STAR 2 REPLACEMENT VISORS BHV045

£16.66£19.99 excluding shipping and VAT

New Bob Heath replacement visors for the following vintage 1970s/1980,S BELL helmets –

STAR 2 .

UK orders will be subject to VAT at the applicable rate at the checkout.

All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.

SKU: BELL STAR 2 REPLACEMENT VISORS BHV045 Categories: ,

Description

BELL STAR 2 MOTORCYCLE HELMET REPLACEMENT VISORS

These visors fit the second version of the Bell Star helmet which is known as the mark 2.

They replace the original Bell visor with the part number 241.

This second version of the Star helmet uses a longer visor which measures 35 cms between the inside edges of the pivot hole slots , it should not be confused with the earlier Bell Star 1 helmet which uses a shorter visor ( 31.5 cms between the inside edges of the pivot hole slots )

These are 1.0 mm thick flat visors that are designed to be fitted by simply clipping over the two top edge pivot slots onto the pivot fittings on the helmet and then fastening the two bottom edge press studs to retain the visor in position

Please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.

We have visors available for the earlier Bell Star 1 helmets on a separate listing on our website.

We also have pivot fitting kits available for these helmets BHV reference kit 2 .

The visors are BSI approved and fully U.K. road legal. They give 97 % U.V. light protection. The light smoke tint visors have a light transmission of 50%. The dark tint smoke visors have a light transmission of approximately 20% , they are non certified visors for off road use or display purposes only.

Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.

Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.

PLEASE NOTE THE FOLLOWING INFORMATION FOR THE DARK TINT SMOKE COLOUR OPTION

The BHV Dark tinted race visor is not legal for U.K. public road use (and possibly other regions.

This visor is supplied for circuit racing ,track day use, or use on private roads.

IT IS YOUR SOLE RESPONSIBILITY TO KNOW THE LEGAL RESTRICTIONS FOR VISORS IN YOUR REGION.WE CANNOT BE HELD LIABLE FOR ANY CONSEQUENCES ARISING FROM THE MISUSE OR ILLEGAL USE OF THIS PRODUCT.