ARAI X7, X-75, REPLACEMENT VISORS BHV107A

£16.24£17.49 excluding shipping and VAT

New Bob Heath replacement visors for the following ARAI helmets :-

X7, X-75.

Clear

UK orders will be subject to VAT at the applicable rate at the checkout.

All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.

SKU: ARAI X7, X-75, REPLACEMENT VISORS BHV107A Category:

Description

ARAI X7, X-75, REPLACEMENT VISORS BHV107A

THIS LISTING IS FOR BRAND NEW REPLACEMENT VISORS FOR THE VINTAGE ARAI X7, X-75 HELMETS FROM THE 1970,S/1980,S .

THEY ARE FLAT VISORS THAT ARE SECURED IN PLACE VIA THE TWO TOP EDGE PIVOT HOLES THAT THE PIVOT FITTINGS ON YOUR HELMET PASS THROUGH, AND THE TWO BOTTOM EDGE PRESS STUDS THAT FIX ONTO THE THE STUDS ON YOUR HELMET.

THE VISORS COME FITTED WITH METAL TEAR OFF/ LIFTING POSTS AS STANDARD.

THE VISORS MEASURE 31.75 cms BETWEEN THE INSIDE EDGES OF THE PIVOT HOLE SLOTS, AND 6.0 cms BETWEEN THE LOWER EDGES OF THE PIVOT HOLES AND THE TOP OF THE PRESS STUDS.

THE VISORS ARE AVAILABLE IN CLEAR,AND LIGHT SMOKE TINT. PLEASE SELECT WHICH COLOUR YOU REQUIRE FROM THE OPTION LIST WHEN YOU CLICK TO BUY.

THE CLEAR,AND LIGHT SMOKE TINT, VISORS ARE BSI APPROVED AND FULLY U.K.ROAD LEGAL .THEY GIVE 97 % U.V. LIGHT PROTECTION . THE LIGHT SMOKE TINT VISORS HAVE A LIGHT TRANSMISSION OF APPROXIMATELY 50%.

MADE IN THE U.K. BY BOB HEATH VISORS LTD FROM 1.0MM THICK LEXAN POLYCARBONATE, THESE VISORS HAVE AN ABRASION RESISTANT COATING ON BOTH SIDES.

TINTED VISORS ARE RECOMMENDED FOR DAYTIME USE ONLY AND ARE STAMPED AS SUCH AS PER THE BSI STANDARD REQUIREMENT.