ARAI SAI TYPE DUAL PANE RACE VISORS FOR RX7-GP,AXCES 2/3,CHASER V,CORSAIR V,QUANTUM 2/SV

Description

ARAI SAI TYPE DUAL PANE RACE VISORS RAIN VISORS WITH ANTI FOG INSERT.

These are new old stock genuine Arai SAI type Dual Pane Race race visors with anti fog inserts and tear off posts/ tear offs fitted as were supplied by the Arai race services truck to leading motorcycle racers.

IT IS UNREALISTIC TO EXPECT ANY VISOR TO BE “FOG PROOF” BUT  THIS IS THE VERY BEST OPTION THAT ARAI SUPPLIED TO THE BEST RIDERS IN THE WORLD. IT IS AN ‘ANTI-FOG’ VISOR AND SHOULD NOT BE CONSIDERED “FOG PROOF” AS THERE REALLY IS NOT A FOG PROOF SYSTEM AVAILABLE ANYWHERE IN THE WORLD FOR MOTORCYCLE VISORS – THESE VISORS ARE THE VERY BEST OPTION THAT ARAI COULD SUPPLY.

PLEASE BE AWARE BEFORE PURCHASE THAT DUE TO THE SPECIAL NATURE OF THESE VISORS ARAI DO NOT ACCEPT RETURNS ON THEM ONCE THEY ARE OPENED OR USED. WE WILL ONLY CONSIDER ANY RETURN IN A NEW UNOPENED AND THEREFORE UNUSED CONDITION.

THE VISORS HAVE A RUBBER RAIN STRIP FIXED TO THE VISOR TOP EDGE TO PREVENT WATER INGRESS AND AN ANTI FOG INSERT STUCK TO THE VISOR INNER SURFACE TO HELP PREVENT VISOR MISTING.

THEY ARE FLAT FRONT (2D) RACE TYPE VISORS FITTED WITH TEAR OFF POSTS WHICH ALLOW FOR THE FITTING OF TEAR OFF FILMS .

PLEASE NOTE THESE ARE RACE VISORS INTENDED FOR OFF ROAD USE ONLY AS THEY DO NOT COME WITH ECE OR BSI APPROVAL MARKINGS.

It is important that prior to ordering that you check the genuine Arai visor part number on your original visor to ensure that you are ordering the correct replacement visor – do not rely on the helmet model name as Arai have re-used many of these names over the years. Your oem visor part number can usually be found in the bottom left-hand corner of the visor as worn and has to state SAI – if your OEM visor does not state this part number please contact us for advice.

These Dual Pane visors fit the following Arai SAI type helmets :

• AXCES II (AXCES 2)
• AXCES III (AXCES 3)
• CHASER-V (Possibility Also Known as the Vector 2 in USA & Australia)
• CHASER-V Pro
• CORSAIR-V
• DEBUT
• QUANTUM 2
• QUANTUM-ST
• REBEL
• RX7-GP
• SIGNET Q
• VECTOR II

These visors do not fit Arai helmets that use Arai SAL type, G type, G2/3 type or VAS-V type genuine visors.

PLEASE NOTE THAT DUE TO MANUFACTURING TOLERANCIES ON ARAI HELMETS AND VISORS, SOME VISOR ADJUSTMENT MAY BE NECESSARY TO ACHIEVE THE CORRECT OPTIMUM VISOR FITMENT. ALL ARAI BASE PLATES ARE DESIGNED TO GIVE FINE ADJUSTMENT OF THE VISOR  SIMPLY BY SLACKENING OFF THE RETAINING SCREWS AND MOVING THE PLATES – PLEASE REFER TO YOUR HELMET INSTRUCTIONS MANUAL.

THESE GENUINE RACE VISORS ARE MADE IN JAPAN BY ARAI FROM 2.0MM POLYCARBONATE. THEY HAVE AN ABRASION RESISTANT COATING ON THE OUTER SURFACE. THE INNER VISOR SURFACE HAS AN ANTI FOG FILM MOUNTED WITH A FOAM GASKET. (THIS CREATES AN AIRGAP WHICH ENHANCES THE VISORS ABILITY TO RESIST FOGGING EVEN IN EXTREME CONDITIONS). THE INNER FILM SURFACE IS A VERY SPECIAL ANTI FOG AND IS FRAGILE. IT MUST BE CARED FOR WITH EXTREME CARE – MICRO FIBER CLOTH AND WATER ONLY.

ARAI OFFER NO WARRANTY FOR IMPROPER CARE OF THIS PRODUCT.

PLEASE NOTE THAT WE CONSIDER THESE VISORS TO BE A SPECIALIST RACING PRODUCT – DUE TO THEIR HIGH PERFOMANCE YOU SHOULD EXPECT THEM TO HAVE A MUCH SHORTER USABLE LIFE EXPECTANCY THAN A STANDARD/NORMAL ROAD VISOR.

THE VISORS PICTURED IN THE LISTING STILL HAVE THE PROTECTIVE GREEN FILM IN PLACE ON THE ANTI FOG INSERT WHICH GIVES THEM A SLIGHTLY GREEN APPEARANCE , YOU REMOVE THIS PRIOR TO USE.