AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54

£15.83£17.49 excluding shipping and VAT

New Bob Heath replacement visors for the following vintage 1980s AGV helmets –

X3000/80 .

This should be considered as the MK2 AGV X3000 helmet as there are earlier and later versions with different visors – so please check before purchasing.

Clear

UK orders will be subject to VAT at the applicable rate at the checkout.

All other destinations may be liable for taxes and duties at the destination country. Please contact your country's local customs to check if you are liable to incur importation charges prior to placing your order.

SKU: AGV X3000/80 (1980's model) VISORS WITH CLIP OVER TOP FITTINGS BHV54 Category:

Description

These are 1.0 mm thick flat visors made to fit the AGV X3000/80 helmets from the 1980’s that had pivot fittings that require the visor to simply clip over the pivot fittings to retain them in position on the helmet.This clip over top pivot fixing type helmet could be considered as the MK2 helmet.This was the second version of the X3000 helmet and there are earlier and later versions with different visors -so please check before purchasing that you are ordering the correct part. If in any doubt please contact us for assistance.

This listing is for our visor BHV54 .

THIS VISOR MEASURES 33.5 cms BETWEEN THE INSIDE EDGES OF THE PIVOT HOLE SLOTS, AND 26.0 cms BETWEEN THE INSIDE EDGES OF THE LOWER STUD SLOTS.

The earlier version of these helmets also made in the 1980’s had screw in pivot fittings that passed through the visor to retain them in position on the helmet.The visor on these helmets is shorter in length and measures 31.4 cms between the inside edges of the pivot hole slots, and
23.0 cms between the inside edges of the lower stud
slots this is our visor BHV002 .

THESE VISORS DO NOT FIT THE NEW 2017 ONWARDS AGV X3000 ‘LEGENDS’ LEG-1 HELMETS WITH 3D BUBBLE SHAPE VISORS.

The visors are BSI approved and fully U.K. road legal. They give 97 % U.V. light protection. The smoke tint visors have a light transmission of 50%

Made in the U.K. by Bob Heath visors Ltd from Lexan polycarbonate, these visors have an abrasion resistant coating on both sides.

Tinted visors are recommended for daytime use only and are stamped as such as per the BSI standard requirement.

The visors are available in clear and light tint smoke options . Please select which option you require from the drop down list.